Mini Minds Hub · Free printable
Shadow Lab: Fair Test: Free Printable Worksheet for Year 6
- ForYear 6
- StageKey Stage 2
- CostFree
- FormatPrintable PDF
Shadow Lab: Fair Test is a science enquiry for Year 6 (ages 10 to 11). Children label each variable C, M or S, make a prediction, then run a test with a torch, a toy figure, a ruler and a wall. It suits children who are ready to plan a fair test and explain their thinking in their own words.
Before anyone switches on a torch, model the sorting with a different test, such as how far a toy car rolls down a ramp. The ramp height is the thing you change (C), the distance rolled is what you measure (M), and the car and the floor stay the same (S). The usual slip is labelling everything C, so ask, "If you changed that too, could you trust the result?"
What is on the sheet
Children begin with a table where they list each variable and label it C for change, M for measure or S for same. They finish the sentence "I will change the ... and measure the ...". Then they run the test with a torch, a toy figure, a ruler and a wall, and record the torch to figure distance and the shadow height in centimetres. Numbered questions with lines for writing ask children to make predictions and explain why a test is fair.
- Variable
- Letter (C, M or S)
- Finish the sentence: I will change the ... and measure the ...
- Test
- Torch to figure (cm)
- Shadow height (cm)
Setting up your shadow lab
Pick a steady spot
Choose a plain wall with a clear patch of floor in front of it. Dim the room a little so the shadow shows up well. A darker room makes the edge of the shadow easier to see and measure.
Mark the floor
Put strips of masking tape on the floor to show where the torch and the figure will stand. Marks mean the set up can be repeated exactly each time.
Keep the torch steady
Rest the torch on a pile of books, or let a partner hold it still. Point it at the figure in the same way every time, so the light does not wander.
Measure the same way
Decide where the ruler starts and stops before you test. Measure from the same starting point each time, and read the number at eye level so it is not misread.
What makes a test fair?
A fair test changes only one thing and measures one thing. Everything else is kept the same. That way, if the results are different, you know what caused it. If two things change at once, you cannot tell which one made the difference. Scientists use this idea in every kind of enquiry, from growing plants to testing materials. Year 6 children are expected to plan tests like this and explain their choices.
Shadows are a good topic for practising this. A shadow forms when an object blocks light from a source. Light travels in straight lines, so the shadow has a shape that matches the object that blocks the light. Children can see results straight away on the wall and measure them with a ruler. That makes it easy to spot when something was not kept the same.
Light and shadow facts
- Light travels in straight lines. That is why we can use it to explain how shadows are made.
- A shadow forms when an opaque object blocks light. Opaque means light cannot pass through it.
- A transparent material, such as clear glass, lets most light pass through, so it makes hardly any shadow.
- A shadow has the same shape as the object that blocks the light.
- Sundials use the shadow of a pointer to show the time of day.
Skills and curriculum link
- Sorting variables
- Making predictions
- Explaining a fair test
- Measuring in centimetres
- Recording results in a table
- Scientific reasoning
Ideas that help with fair testing
- Change one thingIn a fair test, only one variable is changed on purpose. Children can say it aloud: "This is the one thing I will change."
- Keep the rest the sameEvery other variable stays fixed. Ask your child to list them and check each one before every test.
- Measure carefullyUse the same ruler, start from the same point and read it the same way each time, so the numbers can be compared.
- Predict with a reasonA good prediction says what will happen and why. It gives children something to check their results against afterwards.
Key words
- VariableSomething in a test that can change, such as a distance, a size or a time.
- Fair testA test where you change only one thing, measure one thing and keep everything else the same.
- PredictionWhat you think will happen, and why, before you test.
- EvidenceThe results you collect, which you use to support what you say.
- OpaqueDescribes something that blocks light, so a shadow forms behind it.
- MeasureTo find out a size or amount with a tool, such as centimetres on a ruler.
How to use it
- Print both pages. Page 1 is for the child. Keep page 2 for the grown-up.
- Gather a torch, a toy figure, a ruler and a wall. Read the sheet together first.
- Complete the first table before testing. Talk about each C, M or S choice and ask why.
- Run the test. Measure the shadow in centimetres and write each result in the table.
- Check against the notes and answers on page 2. Another day, try the sheet again or add a stretch test.
Help, stretch and game ideas
If it feels too hard
Say the three letters aloud first. Give a word bank: change, measure, same. Let a partner hold the torch while the child measures. Do the table together before any testing begins, so each letter has a clear meaning.
To stretch confident children
Ask children to add a fourth test at 5 cm. Then ask them to explain why one test alone is not enough evidence. Encourage them to use the word "evidence" and to say what a second test could show.
Make it a game
Take turns being the unfair tester. Secretly change one S variable and let your partner spot which one it was. Then swap roles. Players can score a point for each correct spot, and say why the test is no longer fair.
Mistakes to watch for
Watch forA child labels almost every variable C.
Try thisAsk, "If you changed that too, could you tell what caused the result?" Sort the variables into three piles: change, measure and same.
Watch forThe shadow is measured from a different place each time.
Try thisMark the start point with tape and agree where the ruler begins. Measure from the same point for every test.
Watch forA prediction says only "it will change".
Try thisUse the starter "I think ... because ...". Ask what will change, in which direction, and what makes them think so.
Talk about it
- Which variable are you changing on purpose, and why?
- What are you keeping the same? How will you make sure it stays the same?
- What do you think will happen to the shadow? What makes you think that?
- Why might the torch wobbling spoil the test?
- How could you check that your measurement is accurate?
- If a friend changed two things at once, what would you tell them?
Take it off the page
Chalk shadow trace
On a sunny day, trace around a toy figure's shadow on the playground with chalk. Come back later and trace it again to compare. Never look at the Sun.
Shadow puppets
Make a simple puppet from card and a stick. Use a torch against a wall to make its shadow, and talk about what changes when you move the light.
Plan another fair test
Choose a question such as which paper towel soaks up the most water. Write down what you would change (C), measure (M) and keep the same (S).
Who it is for
Parents
Sit with your child for the first go and let them lead. Ask them to explain each C, M or S choice before they test. Short sessions work well, and you can return to the sheet another day.
Teachers
Use it as a starter, a plenary, an early finisher task or part of a light unit. It needs only a torch, a figure, a ruler and a wall. Page 2 has support, stretch and answers for mixed groups.
Home educators
It fits neatly into a wider science plan on light and working scientifically. Siblings can take turns as tester and checker. Repeat it later with a different object to show how fair testing works in any setting.
Where this fits in science learning
Earlier in Key Stage 2, children learn that shadows form when an opaque object blocks light, and they look for patterns in how shadows change. They also begin to carry out simple tests and record what they find.
In Year 6, children use the idea that light travels in straight lines to explain shadows. They also plan enquiries and control variables. After this, children move on to more formal enquiry planning in Key Stage 3, where careful, repeatable testing matters even more.
Questions parents and teachers ask
- What is a fair test?
A fair test changes only one thing, measures one thing and keeps everything else the same. This means any difference in the results can be linked to the one thing that was changed on purpose.
- What do C, M and S stand for?
C means change, M means measure and S means same. Children label each variable with one letter. The word bank of change, measure and same can help children who need support.
- What equipment do we need?
Children need a torch, a toy figure, a ruler and a wall. A little masking tape for marking the floor is also useful, although the sheet does not need it.
- Do children have to measure in centimetres?
Yes. The results table asks for distances and shadow heights in centimetres. A ruler marked in centimetres works best, and children should measure from the same starting point each time.
- What if my child finds it hard?
Start by saying the three letters aloud. Give the word bank and complete the first table together. A partner can hold the torch while the child measures, so they can focus on the thinking.
- Does the sheet have answers?
Yes. Page 2 is for the grown-up and has notes on how to use the sheet, help for children who find it hard, a stretch idea and the answers. Keep it separate until your child has finished.
- Can it be used in a classroom?
Yes. Teachers can use it as a starter, a plenary, an early finisher task, homework or a table activity. It needs no preparation beyond printing and gathering a torch, a figure and a ruler.
Preview the full PDF
Made by Jaques of London, making games for families since 1795. A printable supports classroom learning and does not replace a teacher.