Mini Minds Hub · Free printable
Teddy for a Toddler Spec: Free Printable Worksheet for Year 9
- ForYear 9
- StageKey Stage 3
- CostFree
- FormatPrintable PDF
Teddy for a Toddler Spec asks Year 9 pupils (ages 13 to 14) to write a design specification for a teddy for a two year old, then judge three teddy designs against it. It suits Key Stage 3 design and technology, especially at the start of a textiles or product design project. Page 2 gives the grown up notes, help, a stretch idea and the answers.
Before pupils look at any of the teddies, ask them to turn one vague word into something checkable. For example, a lunch box that is "strong" could become "still closes after being dropped from table height". The usual slip is a specification full of words like "nice" or "safe" that cannot be tested. A good quick check is to ask whether a stranger could mark a design against each point.
What is on the sheet
Pupils write a specification for a teddy designed for a two year old. They name an outer fabric and give a reason. They then set out safety requirements for how the eyes and nose are attached, and for the seams and the filling. The sheet has cards to cut out and numbered questions with lines for writing. Pupils then judge three teddies against their own specification and explain each judgement, including whether Teddy B meets their size range.
- Materials: name the outer fabric you would choose and give one reason.
- Safety: state how the eyes and nose must be attached.
- Safety: state one requirement for the seams and the filling.
- Compare Teddy B with your size range. Does it meet it? Explain.
How to write a good specification
Start with the user
Ask who will use the product and how. A two year old is very different from a ten year old. Write down what a toddler does with a toy before you write any requirements.
Think about what could go wrong
List the hazards first. Then turn each one into a requirement that says what the design must do to avoid it.
Make each point testable
A good point can be checked by looking, measuring or testing. Try adding a number, a range or a clear yes or no test.
Give a reason
Each choice is stronger with a because. Reasons show that you have thought about the user and not just picked something that sounds right.
What is a design specification?
A specification is a list of what a product must do and be. Designers write one before they make anything. It covers who the product is for, what it is made from, how big it should be, how safe it must be and how it will be looked after. Because it is written first, it gives a fair way to judge ideas later.
Products for toddlers need extra care. Very young children squeeze, drag, drop and chew their toys, and they do it every day. Toys also get washed often. A designer has to think about all of this at the start, which is why a clear specification matters. It turns worries about safety and durability into points that can be checked.
Design facts
- A specification is written before a product is made, not after.
- Designers often test a product against their specification and then change the design.
- Toys for very young children have stricter safety needs than toys for older children.
- Many soft toys carry a label that tells you how to look after them.
- Comparing products against the same list of points is called judging against criteria.
Skills and curriculum link
- Writing a specification
- Judging against criteria
- Explaining design choices
- Thinking about the user
- Using technical vocabulary
Ideas to help you write your specification
- Think about the userPicture a two year old playing with the teddy all day. Think about how they hold it, carry it and treat it.
- Think about careParents will need to clean the toy many times. Ask what that means for the materials you choose.
- Think about sizeA toy has to suit the hands and arms of the child using it. A range of sizes is more useful than a single number.
- Think about riskLook at each part of a teddy and ask what could go wrong with it. Each risk can become one requirement.
Key words
- SpecificationA list of what a product must do and be.
- CriteriaThe standards used to judge something.
- MeasurableAble to be checked with a number or a test.
- HazardSomething that could cause harm.
- DurableAble to last well when used a lot.
- WashableAble to be cleaned in water without being spoilt.
How to use it
- Print both pages. Page 1 is for the pupil. Keep page 2, which has the notes and answers.
- Read the first question together and decide what a good reason looks like. Talk about the user before pupils write.
- Pupils write their own specification first. They should do this before they judge any of the teddies.
- Pupils judge the three teddies against their specification and explain each judgement in writing.
- Check against page 2. Ask pupils to explain their reasoning, then revisit any point that was too vague to test.
Help, stretch and game ideas
If it feels too hard
Use the word bank on page 2: measurable, safe, washable, durable, size, hazard. Write one short sentence for each word. A rough guess is fine for the height range. Do the materials point first, then move on to the safety points.
To stretch confident children
Rewrite each specification point as a measurable target with a number. For example, change "strong" into a test you could repeat. Then rank all three teddies from best to worst and explain your order in two sentences.
Make it a game
Swap sheets with a partner. Judge the three teddies using their specification, not yours. Do you pick the same winner? If not, find the point in the specifications that caused the difference and talk about which is clearer.
Mistakes to watch for
Watch forA specification point is vague, such as "it must be nice" or "it must be safe".
Try thisAsk how someone could check it. Rewrite the point so it says what the teddy must have or do.
Watch forA pupil gives a choice but no reason.
Try thisAdd the word because. Ask what the choice protects against or helps with for a two year old.
Watch forA pupil judges the teddies by which one they like best.
Try thisPoint back to the specification. Ask whether each teddy meets each point, yes or no, before choosing a winner.
Talk about it
- Who is the user, and how is a two year old different from an older child?
- Which point in your specification matters most, and why?
- How could someone test whether a teddy meets that point?
- Which teddy was hardest to judge, and what made it hard?
- Did your partner write a point you missed?
- What would you change in your specification now?
Take it off the page
Soft toy detective
Look at a soft toy at home with an adult. Read its label and note how it is made and cared for. Write three things the designer must have thought about.
Sketch a teddy
Draw your own teddy for a toddler. Label each part and add a reason for each choice.
Specification for something else
Write a short specification for another product, such as a bag for school or a bedtime torch. Make every point testable.
Who it is for
Parents
Let your teenager write their specification first, then ask them to explain each choice to you. You do not need design knowledge. Questions like "how could we check that?" are enough to push the thinking further.
Teachers
Use it as a starter for a textiles or product design project, a plenary after teaching specifications, or a cover task. It needs no preparation beyond printing. Page 2 has support and stretch ideas for mixed ability groups.
Home educators
Use it as part of a wider design and technology plan. It pairs well with looking closely at real products around the house. Pupils can repeat it later with a different product and compare how their specification has improved.
Where this fits in design and technology
Before this, pupils will usually have explored a design brief, looked at existing products and talked about who a product is for. Writing a specification is the next step, because it turns those ideas into clear requirements.
After this, pupils can use a specification to guide their own designs, test prototypes against it and improve their work. These skills carry through Key Stage 4, where specifications and evaluation are part of larger design projects.
Questions parents and teachers ask
- What age is Teddy for a Toddler Spec for?
It is written for Year 9 (ages 13 to 14), in Key Stage 3. It suits design and technology lessons, and also works for home learners who want practice writing a specification.
- What will pupils practise?
Pupils practise writing a design specification and judging products against it. They also practise explaining their design choices, which is a key skill in design and technology.
- How do I use it in class?
Use it as a starter for a textiles or product design project. Pupils write their own specification first, then judge the three teddies against it and explain their decisions.
- What if it feels too hard?
Give a word bank: measurable, safe, washable, durable, size and hazard. Pupils can also give the height range as a rough guess. Page 2 has more help ideas.
- Is it free?
Yes. It is free to print for home and classroom use. You can print it again for other pupils or for revision at a later date.
- Is this a screen free activity?
Yes. It needs only paper and a pencil, so it works for quiet time, homework or a rainy day. Printing in black and white is fine.
- How long does it take?
There is no fixed time. It depends on how much discussion you add and how detailed the specification is. Page 2 has ideas for making it shorter with the help task, or longer with the stretch task.
Preview the full PDF
Made by Jaques of London, making games for families since 1795. A printable supports classroom learning and does not replace a teacher.