Mini Minds Hub · Free printable
Sculpture Park Shape Spotter: Free Printable Worksheet for Year 3
- ForYear 3
- StageKey Stage 2
- CostFree
- FormatPrintable PDF
Sculpture Park Shape Spotter is a Year 3 (ages 7 to 8) maths worksheet where children name 3D shapes, count their faces, edges and vertices, and give reasons for their answers. It suits children who are learning the names of solid shapes and need to explain how they know. Children study sculptures made from stacked shapes, even when the shapes are turned around. A table helps them record what they find.
Before anyone writes, hold up one shape model, turn it onto a different side and ask, "Is it still the same shape?" The usual slip is thinking a turned shape has become a new one. Let your child touch each face, then each edge, then each corner. Then they can count with confidence.
What is on the sheet
Children visit a pretend sculpture park and work out which 3D shapes make up each sculpture. Some sculptures are stacked, like Snowman Stack, where children name both shapes. A table asks them to record the shape, then its faces, edges and vertices. There are numbered questions with space to answer, and lines for writing their reasons. Children look closely, count carefully and explain their thinking in words.
- Snowman Stack is a ball sitting on top of a cube. Name both shapes.
- Shape
- Faces
- Edges
- Vertices
Worked example: a roof shaped block
A sculpture is a triangular prism, like a tent or a Toblerone box. How many faces, edges and vertices does it have?
This is a different shape from the sculptures on the sheet. It shows two ways to count carefully.
Method 1: touch and mark- Hold the shape. Put a small sticker on each flat face as you touch it, then count the stickers: 5 faces.
- Run a finger along every edge. Mark each one with a pencil dot or a different coloured sticker. Count them: 9 edges.
- Touch each corner once and count: 6 vertices.
- Two ends are triangles. Three sides are rectangles. 2 + 3 = 5 faces.
- Each triangle end has 3 edges. 3 + 3 = 6. Three more edges join the two ends. 6 + 3 = 9 edges.
- Each triangle end has 3 corners. 3 + 3 = 6 vertices.
Build your own sculpture park
Junk model sculptures
Collect clean boxes, tubes and tubs. Stack and stick them into a sculpture. Name every shape you used and say how you know.
Modelling clay shapes
Roll and press modelling clay into solid shapes. Flatten the sides to make faces. Count the faces, edges and corners on your own model.
Building block towers
Use wooden or plastic blocks to make a tall sculpture. Take a photo or draw it from the side, then from above. Ask a friend to name the shapes.
Why use sculptures to learn 3D shapes?
A sculpture is an artwork you can walk around. It looks different from the front, the side and above, which is exactly what makes 3D shapes tricky for children. A flat drawing shows one view. A real shape has parts that are hidden from where you stand. Sculptures give children a reason to look from every side.
Many sculptures are built from simple shapes joined together, so they are a good way to practise spotting shapes inside a bigger object. Children learn that a shape keeps its name and its parts when it is turned. They also learn to count faces, edges and vertices in order, so they do not miss any.
Sculpture facts
- A sculpture is a 3D artwork. You can walk around it and see it from different sides.
- Sculptors make art from materials such as stone, metal, clay and wood.
- Some sculptures are made from recycled objects.
- Yorkshire Sculpture Park in West Yorkshire is a place where people can see sculptures outdoors.
- A sculpture can look very different from above than it does from the side.
Skills and curriculum link
- Naming 3D shapes
- Counting faces, edges and vertices
- Giving reasons
- Spotting shapes in a bigger object
- Describing views
Handy ideas about 3D shapes
- FacesA face is a flat surface on a solid shape. Counting them one at a time, and marking each, stops children counting the same one twice.
- Edges and verticesAn edge is where two faces meet. A vertex is a corner. Counting edges and vertices separately keeps the two ideas apart.
- Turning a shapeTurning a shape around does not change its name or its parts. It only changes what you can see.
- Stacked shapesA sculpture can be made of two or more shapes joined together. Name each part on its own first.
Key words
- 3D shapeA solid shape that you can hold. It has length, width and height.
- FaceA flat surface on a solid shape.
- EdgeThe line where two faces meet.
- VertexA corner where edges meet. More than one are called vertices.
- RotateTo turn something around.
- View from aboveWhat something looks like when you look straight down on it.
How to use it
- Print both pages. Page 1 is for your child. Keep page 2, which has the notes and answers.
- Gather some 3D shape models or household objects such as boxes and tubes, so your child can hold and turn them.
- Read the first question together. Ask your child to name the shape before they write anything.
- Let them count faces, edges and vertices one at a time, and fill in the table as they go.
- Check with page 2. Ask, "How did you know?" Come back another day to try the tricky ones again.
Help, stretch and game ideas
If it feels too hard
Let your child hold a model and put a small sticker on each face as they count. Then do the same for edges and corners, using a different colour each time. Count one thing at a time and fill in the table after each count.
To stretch confident children
Invent a new sculpture made from three shapes. Draw it, then describe how it would look from the side and from above. Write one sentence for each shape saying how you know what it is.
Make it a game
Build a sculpture from shapes behind a book. Show a friend only the side view, or the view from above. They guess which shapes you used. Swap roles and see who guesses more.
Mistakes to watch for
Watch forA child counts only the faces they can see and misses the hidden ones.
Try thisTurn the shape over and mark each face with a sticker. Count the stickers at the end.
Watch forA child mixes up edges and vertices.
Try thisSay it aloud: an edge is a line you can run a finger along, a vertex is a corner you can point to.
Watch forA child thinks a turned shape is a different shape.
Try thisTurn the model slowly and ask what has changed. Count its faces again to show they stay the same.
Talk about it
- How can you tell what this shape is?
- What would this sculpture look like from above?
- Which shape would you put at the bottom of a tall sculpture? Why?
- How did you make sure you did not count a face twice?
- Can you find this shape somewhere in our home?
- What would you change to make a different sculpture?
Take it off the page
Shape hunt
Look around your home or classroom for objects shaped like boxes, tubes and balls. Sort them into groups and name each group.
Sculpture shadows
Put a toy model near a lamp or sunny window. Look at the shadow it makes and guess the shape. Turn it and see how the shadow changes.
Mystery bag
Put a solid shape in a bag. Your child feels it and says how many flat faces and corners they can find. Then they guess its name.
Who it is for
Parents
Sit with your child for the first go and let them hold the shapes. Ask them to explain each answer in their own words. The sheet works well when they can touch real objects.
Teachers
Use it as a starter or plenary after teaching 3D shape names. It works for early finishers, and the support and stretch ideas on page 2 help with mixed groups. Shape models on each table make it more effective.
Home educators
Pair it with a shape hunt around the house or garden, or a session building models from boxes. Children can redo the sheet later with different objects for a quick review.
Where this fits in
Before this sheet, children name common 2D shapes and meet simple solid shapes through play and handling. They learn that flat shapes make up the faces of solid ones.
After it, children in Key Stage 2 go on to describe shapes by their properties more precisely, link solids to their nets and draw them from different angles. Counting faces, edges and vertices is a base for all of this.
Questions parents and teachers ask
- What age is Sculpture Park Shape Spotter for?
It is written for Year 3 (ages 7 to 8) in Key Stage 2. It also helps older children who need to recap 3D shape names, or younger children who enjoy handling shapes with support.
- What will children practise?
They practise naming 3D shapes, counting faces, edges and vertices, and giving reasons for their answers. Children also learn to spot shapes inside a bigger object and to think about shapes that are turned around.
- Do children need shape models?
It helps a lot. Holding, turning and counting on a real shape makes the ideas clearer. If you have no models, use boxes, tins and balls from around the home.
- What if it feels too hard?
Slow down and make it hands on. Let your child touch each face and edge, and mark them with small stickers as they count. Page 2 has more help for children who find it hard.
- Are the answers included?
Yes. Page 2 is for the grown-up and has the answers, with notes on how to use the sheet, help ideas and a stretch task. Keep it back until your child has finished.
- Is it free, and do I need colour printing?
Yes, it is free to print for home and classroom use. Black and white on plain A4 paper works well, so you do not need a colour printer.
- Can teachers and home educators use it?
Yes. Teachers can use it as a starter, plenary, early finisher task or table activity. Home educators can use it on its own or as part of a wider maths plan, and print it again for brothers, sisters or revision.
Preview the full PDF
Made by Jaques of London, making games for families since 1795. A printable supports classroom learning and does not replace a teacher.