Mini Minds Hub · Free printable

Pull Tab Thank You Card: Free Printable Craft Activity for Year 6

  • ForYear 6
  • StageKey Stage 2
  • CostFree
  • FormatPrintable PDF

Pull Tab Thank You Card asks Year 6 children (ages 10 to 11) to plan, build and explain a thank you card with a moving flower or waving hand. It suits children who enjoy making things and are ready to say how a lever and a linkage work.

Before any glue comes out, model one test with scrap card. Pin a strip loosely to a spare piece and let the child wiggle it with one finger. The usual slip is a pin pushed in too tight, so the lever will not turn. If it turns freely in the test, it is ready for the real card.

What is on the sheet

Children start with a checklist and gather thin card, paper strips, a split pin, scissors and glue. They answer four numbered questions about levers and linkages. Then they plan the front of the card in a box, drawing their design and writing a thank you message. Next they fix a lever to the card with a split pin, join a linkage strip to the flower or hand, then pull the tab and test it. Last, they explain on the lines how it works.

  • Name the part that stays fixed while the lever turns.
  • Front of my card: draw your design and write your message
  • Gather thin card, paper strips, a split pin, scissors and glue.
  • Fix the lever to the card with a split pin. Keep it loose so it turns.
  • Join a linkage strip to the flower or hand. Pull the tab and test it.

Building the card step by step

Plan before cutting

Sketch the front of the card first. Decide whether the flower or the waving hand will move, and where the tab will sit so a thumb and finger can reach it.

Prepare the strips

Cut the lever and the linkage strip from thin card or paper strips. Smooth, straight edges help the parts slide and turn without catching.

Fix the lever loosely

Push the split pin through the lever and the card, then open the legs flat at the back. Keep it loose so the lever turns. An adult should make any holes that need a sharp point.

Join, pull and test

Join the linkage strip to the flower or hand, then pull the tab. If the movement is stiff or small, adjust one thing at a time and test again.

Levers and linkages in a moving card

A lever is a stiff strip that turns to move something. A linkage is a set of strips joined together so that movement passes from one part to another. In design and technology, children learn that a simple push or pull can be changed into a different movement, such as a turn or a wave. A pull tab card is a small, safe way to see this happen in your hands.

Thank you cards are a good reason to make something. The card has a real reader, so children think about design, message and how well it works. Testing matters too. A child who pulls the tab, sees what goes wrong and makes a small change is doing real design work. Explaining the result in words is part of the task.

Scissors and the sharp ends of split pins need care. Adults should make any holes that need a sharp point, and any cutting with a craft knife. Children should not use a craft knife. Open the pin legs flat at the back of the card so they do not scratch.

Skills and curriculum link

  • Using levers
  • Making linkages
  • Designing a card
  • Testing and improving
  • Explaining how it works
  • Following a checklist

Ideas to help you guide the making

  • Test on scrap firstA spare strip and pin let children try the movement without risking the finished card. Mistakes on scrap cost nothing.
  • Loose means free to moveA pin that grips too hard stops a lever turning. A little wiggle room is what you want.
  • Strip length changes the movementA longer strip usually moves its far end through a bigger arc. Children can try two lengths and compare.
  • Change one thing at a timeIf the card does not work, alter only one part, then test again. This shows which change made the difference.

Key words

  • LeverA stiff strip that turns to move something.
  • LinkageStrips joined together so movement passes from one part to another.
  • MechanismParts working together to make a movement happen.
  • Split pinA metal fastener with two legs. The legs open flat behind the card to hold parts together.
  • TabThe part you pull to make the card move.
  • TestTry the card out to see whether it works as planned.

How to use it

  1. Print both pages. Page 1 is for the child. Keep page 2 for the grown-up, as it has the notes and answers.
  2. Lay out thin card, paper strips, a split pin, scissors and glue. Tick them off on the checklist.
  3. Answer the four questions first. Then plan the front of the card by drawing the design and writing the message.
  4. Build the card. Fix the lever loosely with the split pin, join the linkage strip to the flower or hand, then pull the tab and test it.
  5. Write the explanation of how it works. Check with the notes and answers on page 2, then talk about what you would change.

Help, stretch and game ideas

If it feels too hard

Give a ready cut lever strip and a pre punched split pin hole, so the child can focus on how it moves. Let them play with the spare strip first and point to the part that stays still before they answer.

To stretch confident children

Add a second lever so a different part moves too, such as a leaf or a second hand. Then explain in words how changing the pivot positions changes the movement. Test two versions and say which works better.

Make it a game

Swap cards with a partner. Each person pulls the other's tab and describes what is happening inside the card. Then guess which strip is the lever and which is the linkage. Swap back and share what you noticed.

Talk about it

  • Why did you choose a flower or a waving hand?
  • What happens inside the card when you pull the tab?
  • Which part moves and which part stays still?
  • What did you change after your first test?
  • How would the card move if the strip were longer or shorter?
  • Who will get your card, and what does your message say?

Take it off the page

Mechanism hunt

Look around the home for things that use levers, such as a pair of scissors or a door handle. Pull, push or turn each one and describe how it moves.

Paper strip puppets

Make a simple puppet from card and a split pin. Join two strips so an arm or leg moves when you pull a string or strip.

Write a second thank you

Write a thank you message to someone who has helped you. Practise your best handwriting and choose words that say exactly why you are grateful.

Who it is for

Parents

Sit with your child for the first test strip, then let them lead. Ask them to explain each choice. Do any hole punching or knife cutting yourself, as these are adult jobs. Enjoy giving the finished card to its reader.

Teachers

Use it as a design and technology project, a thank you task after a visit or a table activity. Prepare spare strips and pins. Page 2 gives support and stretch ideas for mixed ability groups, and you can assess the written explanation.

Home educators

Print it as part of a wider design and technology plan. It pairs well with a look at everyday levers around the house. It is easy to repeat for brothers and sisters, and each child can make a different design.

Where this skill fits

Before this, children may have made simple moving pictures with sliders and levers, and learned that moving parts need fixing in the right way. They have also used simple tools safely and talked about what makes a product work.

After this, children can build mechanisms into larger projects. They can use more than one moving part, plan how each is made and tested, and explain their design choices with more detail.

Questions parents and teachers ask

What age is the Pull Tab Thank You Card for?

It is written for Year 6, ages 10 to 11, in Key Stage 2. Younger children may manage with adult help, and older children can use the stretch idea on page 2.

What materials do we need?

You need thin card, paper strips, a split pin, scissors and glue. A pencil is useful for planning and writing. Spare card is handy for testing before building the final card.

Does a grown-up need to help?

Children can plan, assemble and test on their own, but adults should do any cutting with a craft knife and any holes that need a sharp point. Some children will want a grown-up nearby to talk through ideas.

What is a linkage?

A linkage is a set of strips joined together so that movement passes from one part to another. In this card, a linkage strip joins the tab to the flower or hand, so pulling the tab moves it.

What if the lever will not move?

Check the split pin first. If it is too tight, loosen it a little so the lever turns freely. Then check that the strips are not catching on the card or on each other.

Can teachers use it in class?

Yes. It works as a design and technology task, a table activity or a thank you project. It needs no preparation beyond printing and gathering simple materials. Page 2 has support, stretch and answers.

Is it screen free?

Yes. It needs paper, card and simple craft tools. Children plan, make, test and explain by hand, which makes it a good quiet activity at home or in the classroom.

Preview the full PDF

Made by Jaques of London, making games for families since 1795. A printable supports classroom learning and does not replace a teacher.