Mini Minds Hub · Free printable

Gift Shop Keyring Spec: Free Printable Worksheet for Year 9

  • ForYear 9
  • StageKey Stage 3
  • CostFree
  • FormatPrintable PDF

Gift Shop Keyring Spec asks children to write a testable design spec for a museum gift shop keyring, sketch two ideas, then score both against the spec and choose one. It suits Year 9 (ages 13 to 14) in Key Stage 3 design and technology. Page 2 gives the grown-up notes, help, a stretch idea and answers.

Before they write their own spec, model one weak statement from a different product. Ask, "Could a stranger check this with a ruler, scales or a price tag and agree on pass or fail?" The usual slip is adding a number but no unit, or no way to check it.

What is on the sheet

Children start by rewriting two weak design statements so that each one can be tested. They then write their own spec points for the keyring, covering size and weight, material and cost limit with a reason, and who will buy it and how it links to the museum. Next they sketch and label two ideas, Idea A and Idea B. Finally they fill in a table, scoring each idea from 0 to 3 against every spec point.

  • Weak: "It should be strong." Rewrite it so it can be tested.
  • Weak: "It should be cheap." Rewrite it using a number.
  • Your spec: size and weight of the keyring.
  • Your spec: material and a cost limit, with a reason.
  • Your spec: who will buy it and how it links to the museum.
  • Idea A: sketch and label size and material
  • Idea B: sketch and label size and material
  • Spec point
  • Idea A (0 to 3)
  • Idea B (0 to 3)

Worked example: from vague to testable

Weak: "The bookmark should be a good size." Rewrite it so it can be tested.

This example is about a bookmark, not a keyring, and uses different wording and numbers from the sheet. It shows the method only.

Method 1: ask three questions
  1. What is being described? Here it is the size of the bookmark.
  2. How much or how many? Choose measurements, such as a length range and a maximum width.
  3. How will someone check it? A ruler gives a clear yes or no.
Method 2: build it in parts
  1. Start with the word must: "The bookmark must be..."
  2. Add a measurement with a unit: "14 cm to 16 cm long and no wider than 4 cm".
  3. Add a reason after it: "so it fits inside a paperback". The reason shows why the number was chosen.
The bookmark must be 14 cm to 16 cm long and no wider than 4 cm, so it fits inside a paperback.

What makes a spec point testable

Use a measurement

A testable point names something you can measure, such as length, mass or cost. Words like nice or good cannot be measured.

Always add the unit

A number alone is unclear. 20 could be millimetres, grams or pounds. Write the unit every time.

Give a limit or a range

Words like no more than, at least or between set a clear pass line. Then two people will reach the same decision.

Add a short reason

A reason shows the number was chosen for a purpose, such as the buyer, the shop or the museum theme.

Why designers write a specification

A design specification is a list of requirements that a product must meet. It is written before the designing starts. It covers things such as size, weight, materials, cost and the people who will use or buy the product. Because it is written down, everyone working on the project can see what the product is meant to do.

A spec is only useful if each point can be checked. Vague points lead to arguments, because two people can read them differently. Measurable points let designers compare several ideas fairly, score each one and explain their choice. This is the evaluating part of the design process in Key Stage 3 design and technology.

Facts about specifications

  • A specification is a list of requirements that a design must meet.
  • A measurable spec point uses a number and a unit, such as millimetres, grams or pounds.
  • Designers often score several ideas against the same list so the comparison is fair.
  • A product that is made in large numbers needs a clear spec so every copy matches.
  • A good spec can give a reason for each limit, such as the cost a buyer will accept.

Skills and curriculum link

  • Writing measurable criteria
  • Annotated sketching
  • Evaluating against a specification
  • Using units and limits
  • Justifying a choice

Ideas to help with design thinking

  • Think about the buyerA keyring for a museum shop is bought by a particular kind of person. Picture them first. It helps decide size, price and style.
  • Handle real objectsLook at a real keyring or small item. Measure it with a ruler and weigh it if you can. This shows what realistic numbers look like.
  • Label as you sketchShort labels with a measurement and a material turn a drawing into evidence. Someone else can then judge the idea without asking you.
  • Score the spec, not the favouriteScores should come from the written spec points. Ask which numbers the idea meets, not which one looks nicer.

Key words

  • SpecificationA list of what a product must do or be. It is often shortened to spec.
  • CriterionOne point on the list that a design is judged against. The plural is criteria.
  • TestableAble to be checked with a measurement or test, giving a clear pass or fail.
  • AnnotateAdd short labels or notes to a sketch to explain it.
  • ConstraintA limit on a design, such as cost, size or time.
  • EvaluateJudge how well something meets the spec, and give reasons.

How to use it

  1. Print both pages. Page 1 is for the pupil. Keep page 2, which has the notes and answers.
  2. Read the two weak statements together. Ask what could be measured and what a ruler, scales or price tag would show.
  3. Write the spec points for size and weight, material and cost, and buyer and museum link. Check each one has a unit or a clear reason.
  4. Sketch Idea A and Idea B. Label the size and material on each drawing.
  5. Score each idea from 0 to 3 against every spec point in the table. Add up the scores, choose one idea and say why. Check against page 2.

Help, stretch and game ideas

If it feels too hard

Offer sentence starters such as "The keyring must be no more than ..." and give a sample cost range to work from. Do the first spec point together, then let the pupil write the others. Hold a real keyring so the size feels familiar.

To stretch confident children

Add a manufacturing constraint to the spec, such as a part that must be made on a laser cutter in under two minutes. This is a thinking task on paper only. Then rescore both ideas and say whether the choice changes.

Make it a game

Swap sheets with a partner. Each person scores the other's two ideas against the spec written on that sheet. Compare scores. If you disagree, find the spec point that was not clear enough and rewrite it.

Mistakes to watch for

Watch forA number is written without a unit, such as "under 50".

Try thisAsk, "50 what?" Add millimetres, grams or pounds so the point can be checked.

Watch forIdeas are scored by which sketch looks nicer.

Try thisGo back to each spec point. Ask what the sketch shows for that point and give a score from the label.

Watch forThe museum link is vague, so every idea seems to fit.

Try thisName one feature a buyer could point to. Then you can tell clearly whether each idea has it.

Talk about it

  • Which of your spec points was hardest to make testable, and why?
  • How would you check that point with a tool or a test?
  • Who is the buyer, and what would make them pick this keyring up?
  • What did you give up in Idea A to get the benefits of Idea B?
  • Did your scores match your first feeling? Why or why not?
  • If the cost limit went down, which spec point would you change first?

Take it off the page

Measure a real keyring

Find a keyring or small item at home. Measure its length and width in millimetres and weigh it if you have scales. Write a spec point that describes it.

Rewrite the weak words

Collect vague phrases from adverts or packaging, such as "easy to use". Rewrite each one with a number and a unit.

Design a bag tag

Choose a different small product for a gift shop. Write a short spec, sketch two ideas and score them in a table.

Who it is for

Parents

Sit with your teen for the first spec point, then let them lead. Ask how someone could check each point. You do not need design knowledge. Praise clear reasoning, and use page 2 to check the work.

Teachers

Use it as a project starter, a cover lesson or a plenary on evaluating. Pupils work alone, then compare specs with a partner before sketching. Page 2 gives support, stretch and answers for mixed ability groups.

Home educators

Use it as part of a wider design and technology plan. Pair it with a visit to a museum or gift shop, or with looking at real products at home. Repeat the task later with a different product.

Where this skill fits

Before this, pupils have designed and made products by sketching ideas and saying who they are for. They may have used simple design criteria. This sheet asks them to make those criteria exact, with numbers, units and reasons.

After this, pupils can write fuller specifications for longer projects and use them to evaluate prototypes and finished products. Writing testable criteria is also a skill that continues into GCSE design and technology.

Questions parents and teachers ask

What age is Gift Shop Keyring Spec for?

It is written for Year 9 (ages 13 to 14), in Key Stage 3. Younger pupils can try it with support, and older pupils can use it as a quick refresher on writing specifications.

What will pupils practise?

They practise writing a measurable design specification, sketching two ideas with labels and evaluating both against the spec. These support the design and evaluate strands of Key Stage 3 design and technology.

What does testable mean in a spec?

It means the point can be checked with a measurement or test, so anyone gets the same pass or fail result. A number with a unit, or a clear limit, usually makes a point testable.

Do pupils need to be good at drawing?

No. The sketches only need to be clear enough to show the idea. The labels for size and material matter more than the artwork, because the labels are what get scored.

How should the scores be given?

Score each idea from 0 to 3 for every spec point in the table, using the written spec. A higher score means the idea meets that point more fully. Then add the scores to compare the ideas.

What if both ideas get the same total?

Ask which spec point matters most for the buyer and museum shop, and look at the scores for that point first. Pupils can also improve one sketch. The final choice should always come with a reason.

Can teachers use it in class?

Yes. It works as a project starter, plenary, cover lesson or homework task. It needs only printing, pencils and rulers. Pupils can compare specs with a partner before sketching, which helps them spot vague wording.

Preview the full PDF

Made by Jaques of London, making games for families since 1795. A printable supports classroom learning and does not replace a teacher.