Mini Minds Hub · Free printable

Build a Bed for Teddy: Free Printable Planner for Year 1

  • ForYear 1
  • StageKey Stage 1
  • CostFree
  • FormatPrintable PDF

Build a Bed for Teddy is a design and technology planner for Year 1 (ages 5 to 6). Children read Teddy's wish list, then draw and label a bed that is soft, strong and small enough for a shoebox. They also tick materials and give reasons for their choices. Page 2 gives the grown-up notes, help for children who find it hard, a stretch idea and the answers.

Before children draw, hold up a real shoebox and ask them to show with their hands how big a bed could be. The usual slip is a bed that is too big to fit. Once they have drawn the bed inside the shoebox, hold the box beside the drawing and ask, "Would it fit?"

What is on the sheet

Children start by reading Teddy's list of wishes. They draw a bed and add labels, then draw the bed inside the shoebox and label the shoebox. A checklist lets them tick the materials they would choose, and there are lines for explaining why. They also write a label for the part of the bed that is strong. There are boxes for drawing and notes.

  • Draw your bed. Add labels.
  • Draw your bed inside the shoebox. Label the shoebox.
  • Write a label for the part of your bed that is strong.
  • Card
  • Fabric
  • Cotton wool
  • Sponge
  • Lolly sticks

Turn the plan into a model

Measure against the box

Put a real shoebox on the table before anyone starts building. Hold each piece of the bed up to it. Ask children to check the length and the height as they go.

Collect the materials

Gather the materials children chose on their plan. Let them look at each one, feel it and say what it might do for Teddy's bed.

Test and talk

Press on the finished bed with a flat hand. Ask whether it feels soft enough and strong enough for Teddy. Check it still fits in the shoebox.

Change one thing

Choose one part to improve. Children can swap a material or add a layer, then test again and say what changed.

Why plan before you make?

Designers do not usually start by making. They think about who the product is for and what it needs to do. Then they draw a plan, add labels and choose materials. In this sheet, Teddy is the user and the wish list is the list of needs. Children practise starting from needs, which is a real design habit.

Materials are chosen for the job they have to do. Some are better for one job than another, and a single product can use more than one material. Junk modelling uses saved boxes, card and scraps, so children can test ideas cheaply. A drawing with labels also helps a child explain their thinking to someone else.

If you turn the plan into a model, adults do any cutting that needs a craft knife and any use of a hot glue gun. Keep small pieces and loose cotton wool away from children who still put things in their mouths.

Did you know?

  • A mattress is the part of a bed that you lie on.
  • Designers often draw a plan before they make something.
  • A label is a short word or phrase that points to one part of a drawing.
  • Different materials are used for different jobs.
  • Testing a model shows whether the idea works.

Skills and curriculum link

  • Using a list to plan
  • Drawing a design
  • Labelling parts
  • Choosing materials
  • Giving reasons

Ideas to talk about with children

  • Needs and wishesA product is made for someone. Ask what Teddy needs from a bed and how the drawing shows it.
  • PropertiesMaterials feel and behave differently. Ask children to describe how each one feels, then think about what job it could do.
  • SizeA model has to fit its space. Ask children how they could check a size without guessing.
  • LabelsA good label is short and clear. It tells the reader which part you mean and what it is for.

Key words

  • DesignTo plan how something will look and work before you make it.
  • LabelA word or short phrase that names a part of a drawing.
  • MaterialWhat something is made from.
  • SoftEasy to press. It gives a little when you squeeze it.
  • StrongNot easy to break or bend. It can hold weight.
  • MattressThe part of a bed that you lie on.

How to use it

  1. Print both pages. Page 1 is for your child. Keep page 2 for yourself.
  2. Read Teddy's wish list aloud. Ask your child to say each wish in their own words.
  3. Let your child draw and label the bed first. Then ask them to draw it inside the shoebox and label the box.
  4. Look at the materials together. Ask your child to tick their choices and explain why each one suits the bed.
  5. Check the notes and answers on page 2. If you can, build the bed with a real shoebox and test it by pressing on it.

Help, stretch and game ideas

If it feels too hard

Give a word bank: soft, strong, mattress, pillow. Let your child say each reason aloud before writing, and scribe it for them if needed. Do one part of the bed at a time, so the whole task feels smaller.

To stretch confident children

Ask children to add a new wish for Teddy, such as a blanket, and choose a material for it. They can add it to the drawing with a label, then explain why they chose that material.

Make it a game

When building, test each bed by pressing on it and checking it fits in a real shoebox. Children can swap beds with a friend and say one thing that works well and one thing they might change.

Talk about it

  • What does Teddy want from his bed?
  • Which part of your bed is the softest part? How do you know?
  • How did you decide how big to draw your bed?
  • What would happen if the bed was too big for the shoebox?
  • Which material did you choose and why?
  • What would you change if you made the bed again?

Take it off the page

Junk modelling

Collect clean boxes, card and scraps. Let your child build a small bed for a toy. An adult does any difficult cutting.

Test a pillow

Make a pillow from scrap fabric and stuffing. Ask your child to press it and say what it feels like. Does it stay in place?

Bed for another toy

Pick a different toy and write a new wish list for it. Draw a bed that meets those wishes.

Who it is for

Parents

Sit with your child for the first go and let them lead. Ask why they made each choice, and praise their thinking. If you have a shoebox, build the bed together afterwards. You do not need any special skills.

Teachers

Use it before a junk modelling lesson, as a starter, as a plenary or as an early finisher task. The wish list gives a clear starting point for design. Page 2 has support and stretch ideas for mixed ability groups.

Home educators

Print it as part of a design and technology plan, then build the bed as a follow up. It pairs well with stories about bedtime. Use it again for brothers and sisters, with a different toy and a new wish list.

Where this fits in design and technology

Before a sheet like this, children play with everyday objects and talk about what they are for. They handle different materials and notice how they feel. This helps them choose with reasons rather than guessing.

In Key Stage 1, design and technology covers designing, making and evaluating. This sheet practises the designing strand. The natural next steps are to make the model and test it against the wish list. Later, children's designs become more detailed and they think about more kinds of users and needs.

Questions parents and teachers ask

What age is Build a Bed for Teddy for?

It is written for Year 1 (ages 5 to 6), in Key Stage 1. It can also work for slightly older or younger children with help from an adult.

What will children practise?

Children practise planning a product from a list of needs. They draw and label a design, choose materials and give reasons. It is a design and technology activity at Key Stage 1.

Do children have to build the bed?

No. The sheet is a plan on paper. Building a real bed that fits in a shoebox is an optional next step. Adults should do any cutting that needs a craft knife and any use of a hot glue gun.

What if my child finds it hard?

Give a word bank: soft, strong, mattress, pillow. Let your child say each reason aloud first, then scribe it. Work on one part of the bed at a time.

How can I make it harder?

Ask your child to add a new wish for Teddy, such as a blanket. They then choose a material for it, add it to the drawing and label it.

Is it a screen free activity?

Yes. It needs only paper and a pencil, so it works well for quiet time, rainy days and school holidays. Children draw, think and write by hand.

Can teachers use it in class?

Yes. It works as a starter, plenary, early finisher task, homework or table activity, and needs no preparation beyond printing. It also makes a good lead in to a junk modelling lesson.

Preview the full PDF

Made by Jaques of London, making games for families since 1795. A printable supports classroom learning and does not replace a teacher.