Mini Minds Hub · Free printable

Binary Departure Board: Free Printable Worksheet for Year 8

  • ForYear 8
  • StageKey Stage 3
  • CostFree
  • FormatPrintable PDF

Binary Departure Board asks Year 8 children (ages 12 to 13) to decode a station departure board, where platforms are written in 8 bit binary, and then work out a delayed train's new platform. It suits pupils in Key Stage 3 who have met binary and now need practice converting both ways and adding binary numbers.

Before they start, model one conversion on the board. Write the column values 128, 64, 32, 16, 8, 4, 2, 1 above an 8 bit number, then add up only the columns that hold a 1. The usual slip is reading the columns from the wrong end, so ask children to say which column is worth 1.

What is on the sheet

Children start with a departure board table that has three columns: destination, platform in binary and platform number. They decode the binary platforms into ordinary numbers. Then they answer numbered questions that ask them to turn binary into denary, turn denary into 8 bit binary and add two 8 bit binary numbers. There is space to write each answer and lines for showing working.

  • Destination
  • Platform in binary
  • Platform number
  • The 10:15 train is number 00010100. Write its number in denary.
  • Coach seat 00101101. Write the seat number in denary.
  • A train is moved to platform 11. Write 11 in 8 bit binary.
  • A train leaves at 50 minutes past. Write 50 in 8 bit binary.
  • Add 00000101 + 00000011. Write your answer in 8 bit binary.

Worked example: binary to denary

Write 01100010 in denary.

This example uses a different number from every one on the sheet. It shows two ways to reach the same answer.

Method 1: column values
  1. Write the column values above the digits: 128, 64, 32, 16, 8, 4, 2, 1.
  2. The 1s sit under 64, 32 and 2.
  3. Add those values only: 64 + 32 + 2 = 98.
Method 2: doubling from the left
  1. Start at 0. For each digit, double your running total, then add the digit.
  2. The digits are 0, 1, 1, 0, 0, 0, 1, 0. The running totals are 0, 1, 3, 6, 12, 24, 49, 98.
  3. The last total is the answer.
98

Why do computers use binary?

Computers are built from electronic parts that have two clear states, such as on and off. Binary matches this well, because it uses only two digits, 0 and 1. Each digit is called a bit. A group of 8 bits is called a byte. Every number, letter, picture and sound on a computer is stored as patterns of bits.

Binary works like our everyday denary system, but with two digits instead of ten. In denary, each column is worth ten times the one on its right. In binary, each column is worth double the one on its right. Once children see that pattern, converting stops being a trick to memorise and becomes a method they can explain.

Binary facts

  • A bit is a single binary digit, either 0 or 1.
  • Eight bits together make one byte.
  • Each binary column is worth double the column to its right.
  • With 8 bits you can make 256 different patterns, which cover the numbers 0 to 255.
  • Computers store text, pictures and sound as binary as well as numbers.

Skills and curriculum link

  • Binary to denary
  • Denary to binary
  • Binary addition
  • Place value in base 2
  • Data representation
  • Checking answers

Ideas that help with binary

  • Column valuesBinary columns are worth 1, 2, 4, 8, 16, 32, 64 and 128 from right to left. Each one is double the one before it.
  • Only two digitsA binary digit is always 0 or 1. A 1 means the column value counts. A 0 means it does not.
  • Leading zerosAn 8 bit number always has eight digits. Zeros on the left fill the unused columns and do not change the value.
  • CarryingWhen a column adds up to more than one digit can hold, the extra moves into the next column on the left. This works just like carrying in denary.

Key words

  • BinaryA number system that uses only the digits 0 and 1.
  • DenaryThe ordinary number system we use every day, with ten digits from 0 to 9.
  • BitA single binary digit, either 0 or 1.
  • ByteA group of 8 bits.
  • Column valueWhat a digit is worth because of where it sits in the number.
  • CarryWhen a column total is too big for one digit, the extra moves to the next column on the left.

How to use it

  1. Print both pages. Page 1 is for the child. Keep page 2, which has the notes and the answers.
  2. Read the departure board together. Ask what the three table headings mean before anyone writes.
  3. Work out the first row together. Write the column values above the binary number and add the columns that hold a 1.
  4. Let the child try the numbered questions alone. Remind them that 8 bit answers need all eight digits.
  5. Check with page 2. Ask the child to explain one answer in their own words, then come back another day to redo any that felt hard.

Help, stretch and game ideas

If it feels too hard

Write the column values 128, 64, 32, 16, 8, 4, 2, 1 above each binary number before converting. Cover up any column with a 0. For denary to binary, work from the left and ask whether each column value fits into what is left.

To stretch confident children

Invent a new delayed train sum with a carry in three columns. Write two 8 bit numbers, add them, and show each carry. Then check by turning all three numbers into denary and adding the denary versions. Swap sums with a friend to solve.

Make it a game

Take turns to be the signaller. The signaller writes a platform number from 1 to 30 in 8 bit binary on a scrap of paper. The other player races to decode it. Check with column values. Score a point for each correct decode.

Mistakes to watch for

Watch forA child reads the column values the wrong way round and starts with 1 on the left.

Try thisAlways write 128 on the far left and 1 on the far right. Say the values aloud from left to right before adding.

Watch forA child writes a short answer for 8 bit binary, such as 110 for the number 6.

Try thisDraw eight boxes first. Fill them from the right and put a 0 in every empty box on the left, so 6 becomes 00000110.

Watch forIn addition, a child writes 2 in a column.

Try thisRemind them that binary has only 0 and 1. When a column reaches two, write 0 in that column and carry 1 to the next column on the left.

Talk about it

  • Why does each binary column double as you move left?
  • How can you check a conversion by going back the other way?
  • Why do we write the leading zeros in 8 bit binary?
  • What is the same about carrying in binary and carrying in denary?
  • Why might a computer find binary easier to use than denary?
  • Where else might a station or school use numbers stored as binary?

Take it off the page

Paper bit cards

Make eight cards labelled 128 down to 1. Turn them face up or face down to build a number, then read it as binary and denary.

Torch code

Use two signals, such as a clap and a pause, to stand for 1 and 0. Send a short binary number to a partner who writes it down.

Timetable design

Draw your own departure board on paper with five destinations. Give each platform a number, then write each one in 8 bit binary.

Who it is for

Parents

Sit with your child for the first row, then let them lead. Ask them to explain how they used the column values. You do not need to be confident with binary, because page 2 gives the answers.

Teachers

Use it as a starter after teaching binary, a plenary, or a homework task. Children work from the column values, then check answers in pairs using the key. It needs no preparation beyond printing.

Home educators

Print it as part of a wider computing plan. It pairs well with unplugged activities such as bit cards. Keep the sheet to use again for revision or for a younger brother or sister later.

Where this fits in computing

Before this sheet, children need secure place value in denary and a feel for doubling. They should know that computers store data as 0s and 1s. Counting in binary from zero upwards is a helpful warm up.

After this, learners can explore how text, images and sound are stored as binary. They can also meet other number systems and the limits of 8 bits. The National Curriculum for England covers binary representation and simple binary operations at Key Stage 3.

Questions parents and teachers ask

What age is Binary Departure Board for?

It is written for Year 8, ages 12 to 13, in Key Stage 3. It also works for confident Year 7 pupils or for Year 9 pupils who need revision on binary conversion and addition.

What will children practise?

They practise changing 8 bit binary numbers into denary, changing denary numbers into 8 bit binary, and adding two binary numbers. All of it is set in the context of a train departure board.

How do I use it?

Print both pages. Give page 1 to the child and keep page 2. Children work from the column values, then check their answers in pairs or with an adult using the answers on page 2.

What if it feels too hard?

Let the child write the column values above each binary number before converting. Cover columns holding a 0 and add the rest. Doing the first row together and talking through each step often helps.

Does it need any equipment?

No. It needs only a pencil and the printed pages. Black and white printing works well on plain A4 paper, so you do not need a colour printer.

Does it link to the National Curriculum?

Yes, at strand level. Key Stage 3 computing in England includes how numbers are represented in binary and carrying out simple operations on binary numbers. This sheet gives short, focused practice of that.

Can teachers use it in class?

Yes. It works as a starter, plenary, early finisher task, homework or table activity. It needs no preparation beyond printing, and page 2 gives support and stretch ideas for mixed ability groups.

Preview the full PDF

Made by Jaques of London, making games for families since 1795. A printable supports classroom learning and does not replace a teacher.